Chipped Edge
For a dramatic looking shower, you can add a chipped edge to your
heavy glass shower enclosure. A "Chipped Edge" refers to the scalloped
edgework on the glass.
A NOTE ABOUT ORDERING
When you order a chipped edge, you must specify TWO THINGS:
| Type of
Chipped Edge Pattern |
Double-Sided - The glass
is chipped both directions, providing an attractive rough edge to
the glass. Very non-symmetric.
Single-Sided - The glass is all chipped one direction |
| Type of
Edge Cut |
The shape of the edge of the
glass.
Straight Cut - Typical cut on the glass. No charge.
Wave Cut - A smooth wave. You can specify the height of the
waves and the distance between the peaks and valleys. There are
limitations to the steepness of the waves. If they are too extreme,
the glass will break when chipping it. Talk to your local dealer for
full details.
Jagged Cut - A rougher random cut that complements the
chipped edge pattern making it look like a broken edge. |
Double-sided chipped edge on a straight cut on 1/2" Clear glass.
Double-sided chipped edge on a wave cut on 1/2" Clear glass.
Double-sided chipped edge on a wave cut on 1/2" Clear glass with a
miter
joint corner.
Single-sided chipped edge applied to a wave cut.
Double-sided chipped edge applied to a wave cut on an angle.
Double-sided chipped edge applied to a very small wave cut on an angle.
Double-sided chipped edge applied to a large wave cut.
Double-sided chipped edge applied to a large wave cut.
|
